|
The TNC connector was developed in the late 1950's because of the noise generated by BNC connectors under extreme vibration. The name TNC stands for Threaded Neill-Concelman. The TNC is basically a threaded coupling version of the BNC connector with 50 ohm impedance and operation to 11 GHz. TNC connectors are used in mobile communications where optimum performance is required under vibration, or higher frequency applications than that of BNC.
TNC PLUG
TNC JACK
Products are manufactured in accordance with MIL-C-39012. The above specifications are typical, although some variations may occur within the range. For more detailed technical data on specific products, technical data sheets can be supplied.
|
| ELECTRICAL |
| IMPEDANCE | 50 OHMS
75 OHMS |
| FREQUENCY RANGE | 50 OHMS - DC TO 11GHZ
75 OHMS - DC TO 1GHZ |
| INSULATION RESISTANCE | 5000 MOHMS MIN. |
| INNER CONTACT RESISTANCE | 1-5 mOHMS MAX. |
| OUTER CONTACT RESISTANCE | 0-2 mOHMS MAX. |
| WORKING VOLTAGE | 500V RMS MAX. |
| DIELECTRIC WITHSTANDING VOLTAGE | 1500V RMS MAX. |
| VSWR | 1.35 : 1 MAX. (CABLE FIXING STYLES ONLY) |
| INSERTION LOSS | 0.2db MAX. @ 3GHZ |
| RF LEAKAGE | -55dB MIN. @3GHZ |
| MECHANICAL & ENVIRONMENTAL |
| CABLE RETENTION | EQUAL TO BREAKING STRAIN OF CABLE (CABLE FIXING CONNECTORS ONLY) |
| DURABILITY | 500 MATINGS MINIMUM |
| TEMPERATURE RANGE | -55°C TO +85°C |
| MATERIALS |
| BODY AND COUPLING NUT | BRASS, NICKEL PLATED |
| PIN | BRASS, GOLD PLATED |
| CONTACT | BERYLLIUM COPPER/PHOSPHOR BRONZE/BRASS, GOLD PLATED |
| FERRULE | BRASS, NICKEL PLATED |
| INSULATOR | TEFLON OR DELRIN |
| HARDWARE | BRASS, NICKEL PLATED |
Request specific product information
|
